CYLINDER HEAD REPLACEMENT - CONTINUED
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Failure to follow this warning may cause injury or death.
Cylinder head weighs 90 lb (41 kg).
Tag and mark the short, medium and long head bolts during removal.
Remove, evenly and gradually, 22 head bolts (1) from cylinder head (2) in reverse of sequence.
Do not use pry bar to separate cylinder head from cylinder block.
Place cylinder head on a surface that will not damage cylinder head face.
With assistance, attach lifting device to cylinder head
(2). Lift cylinder head straight up and off cylinder