ENGINE ASSEMBLY REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supports only by lifting device. Failure to follow this warning may cause injury or death.
Weight of the engine, radiator and pump unit is 1600 lb (726 kg).
Attach lifting sling to overhead lift and the two engine lifting brackets (80) and (81).
Carefully check that all hydraulic hoses, fuel hoses, and electrical connections and harnesses have been disconnected.
Remove the four engine mount bolts (82), nuts (83), and washers (84) holding the engine, radiator, and hydraulic pumps
to roller frame.
Remove engine, radiator, and hydraulic pumps from the roller frame.