TM 5-3895-379-23
SIDE DRAIN COCK AND VALVE REPLACEMENT - CONTINUED
0158 00
INSTALLATION - CONTINUED
3.
Install tee (8) and two clips (7) on frame assembly (9)
3
7
3
2
7
4
2
4
with two washers (6) and bolts (5). Tighten bolts to
33-47 lb-ft (45-64 Nm).
4.
Position two water lines (3) on adapters (4) and
tighten nuts (2).
5.
Ensure that drain cock (1) is closed.
CLOSED
OPEN
5
8
6
1
9
401-785
6.
Close right-side door assembly (TM 5-3895-379-10).
7.
Fill water spray system (TM 5-3895-379-10).
8.
Start engine, operate water spray system (TM 5-3895-379-10) and check for leaks.
9.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0158 00-3/(0158 00-4 Blank)