TM 5-3895-379-23
HYDRAULIC OIL COOLER AND FAN SHROUD REPLACEMENT - CONTINUED
0145 00
REMOVAL - CONTINUED
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device is in good condition and of suitable load capacity. Keep clear of heavy parts
supported only by lifting device. Failure to follow this warning may cause injury or death.
CAUTION
Hydraulic oil cooler is filled with hydraulic oil. Care should be taken not to spill oil during removal.
NOTE
Hydraulic oil cooler weighs 90 lb (41 kg).
13.
With assistance, remove two locknuts (26), washers
(27), washers (28), rubber mountings (29), rubber
31
mountings (30), hydraulic oil cooler (6), two washers
(27) and screws (31) from frame assembly (32). Dis-
card locknuts.
27
NOTE
Use container to catch any hydraulic oil that
6
may drain from system. Dispose of oil IAW
local policy and ordinances. Ensure all spills are
cleaned up.
29
30
14.
Turn hydraulic oil cooler over and drain fluid into five
gal (19 l) container.
32
28
27
26
401-751
0145 00-4