ROLLOVER PROTECTION STRUCTURE (ROPS) ASSEMBLY REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
ROPS assembly weighs 880 lb (399 kg).
Attach lifting device to ROPS assembly (4).
There are eleven remaining bolts attaching ROPS assembly to frame assembly. Leave one bolt in each
side for stability.
Remove nine bolts (5) and washers (6) from ROPS assembly (4) and frame assembly (7).
Raise lifting device until tight.
Remove remaining two bolts (5).
While assistant operates lifting device, guide ROPS assembly (4) from frame assembly (7).