TM 5-3895-379-23
STEERING WHEEL AND COLUMN REPLACEMENT - CONTINUED
0120 00
INSTALLATION
NOTE
Do not oil threads of column.
1.
Install steering column (5) to console (12).
2.
Install steering control unit (13) to steering column (5).
3.
While holding steering control unit (13), install four washers (15) and bolts (14) to steering control unit (13), steering
column (5) and console (12). Tighten bolts to 19 lb-ft (26 Nm).
4.
Install three washers (11) and bolts (10) that fasten console (12) to steering column (5).
5.
Install four washers (7), bolts (6) and cover (8) to station (9).
6.
Apply a few drops of oil to spline of steering column (5).
7.
Align steering wheel (3) with one spoke facing downward.
8.
Install steering wheel (3) on steering column (5) with nut (4). Tighten nut to 30-40 lb-ft (41-54 Nm).
9.
Install identification plate (2) on steering wheel (3) with three screws (1). Tighten screws securely.
10.
11.
Remove chocks (TM 5-3895-379-10).
12
11
10
14
15
5
13
8
9
7
6
401-2226
END OF WORK PACKAGE
0120 00-3/(0120 00-4 Blank)