TM 5-3895-379-23
BRAKE HOSES, LINES AND FITTINGS REPLACEMENT - CONTINUED
0119 00
MANUAL BRAKE RELEASE PUMP TO HYDRAULIC LINE REPLACEMENT
NOTE
Use container to catch any hydraulic oil that may drain from system. Dispose of oil IAW local policy
and ordinances. Ensure all spills are cleaned up.
1.
Place container under manual brake release pump elbow (1).
2.
Remove hose (2) and O-ring (3) from manual brake release pump elbow (1) and allow oil to drain into container. Dis-
card O-ring.
3.
Remove hose (2) and preformed packing (4) from tee (5). Discard preformed packing.
4.
Install new preformed packing (4) and hose (2) on tee (5).
5.
Install new O-ring (3) and hose (2) on manual brake release pump elbow (1).
2
4
1
5
3
401-635
MANUAL BRAKE RELEASE PUMP TO BRAKE VALVE LINE REPLACEMENT
1.
Place container with 1 gal. (3.8 l) minimum capacity
6
under brake valve tee (6).
2.
Remove hose (7) and O-ring (8) from brake valve tee
8
(6) and allow oil to drain into container. Discard O-
ring.
7
401-636
0119 00-3