TM 5-3895-379-23
ENGINE OIL SAMPLING VALVE AND FITTINGS REPLACEMENT - CONTINUED
0024 00
REMOVAL
1.
Remove engine oil sampling valve drain cap (1) from engine oil sampling valve (2).
NOTE
Use a container to catch any oil that may drain from engine oil sampling valve. Dispose of oil IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
2.
Place container with 1 qt (0.9 l) minimum capacity under engine oil sampling valve (2).
3.
Turn and hold knurled knob (3) in direction of arrow and allow remainder of engine oil to drain.
4.
Disconnect hourmeter pressure switch connector (4) from connector (5).
5.
Remove hourmeter pressure switch (6) from tee (7).
6.
Loosen locking nut (8) on engine oil sampling valve (2) and remove engine oil sampling valve from connector (9).
7.
Remove O-ring (10) from engine oil sampling valve (2). Discard O-ring.
NOTE
Replace any damaged parts.
8.
Remove connector (9) from tee (7).
7
6
10
2
4
5
1
3
9
8
401-276
0024 00-2