TM 5-3895-379-23
FRONT ENGINE MOUNT REPLACEMENT - CONTINUED
0011 00
REMOVAL
1.
For CB534B Roller only, remove nut (1), washer (2), clip (3), screw (4) and washer (2) from upper cross brace (5).
2.
Remove four nuts (6), washers (7), two clips (8), upper cross brace (5), four screws (9) and washers (7) from upper
frame assembly (10).
4
9
9
2
7
7
10
7
3
8
5
7
6
2
1
6
401-239
WARNING
Use caution when handling heavy parts. Provide adequate support and assistance during procedure. Ensure
that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy parts sup-
ported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Engine weighs 2,000 lb (907 kg).
0011 00-2