TM 5-3895-379-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 5. Propel Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WARNING
When working on a running engine, provide shielding for exposed
rotating parts. Tools, clothing or hands can get caught and cause
injury.
Open right-side door assembly (TM 1. If filter indicator is in red zone,
1.
Roller Will Not Move When Propel
Control Lever Is Operated.
5-3895-379-10) and check hydraulic
oil filter indicator with engine
2. If filter indicator is not in red zone,
running at high idle.
notify supervisor.
WARNING
When working on a running engine, provide shielding for exposed
rotating parts. Tools, clothing or hands can get caught and cause
injury.
Open right-side door assembly (TM 1. If filter indicator is in red zone,
2.
Propel System Engages Very Slowly
When Making A Shift.
5-3895-379-10) and check hydraulic
oil filter with engine running at high
2. If filter indicator is not in red zone,
idle.
notify supervisor.
WARNING
When working on a running engine, provide shielding for exposed
rotating parts. Tools, clothing or hands can get caught and cause
injury.
Open right-side door assembly (TM 1. If filter indicator is in red zone,
3.
Propel System Engages Very
Quickly When Making A Shift.
5-3895-379-10) and check hydraulic
oil filter indicator with engine
2. If filter indicator is not in red zone,
running at high idle.
notify supervisor.
4.
Propel System Operates In Forward
Adjust propel control lever (WP 0114 1. Fault not corrected Replace propel
Speeds Only.
2. Replace propel control valve (WP
3. Replace propel pump assembly
5.
Propel System Operates In Reverse
Adjust propel control lever (WP 0114 1. Fault not corrected. Replace
Speeds Only.
2. Fault not corrected. Replace
3. Fault not corrected. Replace