TROUBLESHOOTING PROCEDURES - CONTINUED
Table 1. Engine Troubleshooting Procedures - Continued.
TEST OR INSPECTION
Engine Oil Pressure is Low (Warning 3. Check for oil in coolant. Pull back 1. If oil is present in coolant, go to
lever and open access door on
Engine Malfunction 4, Coolant in
Light and Warning Horn On) -
operator's platform. Release
Engine Oil/Engine Oil in Coolant.
lever and remove radiator cap.
2. If oil is not present in coolant, fault
Check for oil in coolant.
not corrected. Install radiator cap.
Pull back lever and close access
door. Close right-side door
assembly (TM 5-3895-379-10).
Go to Step 4.
4. Remove fuel lift pump (WP 0028 1. If fuel lift pump is cracked,
check for cracks
damaged or is allowing fuel to leak
damage which would allow fuel