TM 5-3895-379-23-2
0277
REMOVAL
WARNING
Use caution when removing cover from bumper assembly. Failure to follow this warning may
cause injury.
NOTE
Front and rear drain cock and tee are replaced the same way. The front drain cock and tee
are shown.
1.
Remove four bolts (Figure 1, Item 2), washers (Figure 1, Item 1), and cover (Figure 1, Item 3) from bumper
assembly (Figure 1, Item 4).
4
3
1
2
M0267SWR
Figure 1. Drain Cock and Tee Removal.
2.
Loosen nut (Figure 2, Item 9) and remove water line (Figure 2, Item 8) from adapter (Figure 2, Item 7).
3.
Loosen two nuts (Figure 2, Items 2 and 5) and remove water lines (Figure 2, Items 1 and 4) from elbows
(Figure 2, Items 3 and 6).
03/15/2011Rel(1.8)root(maintwp)wpno(M00215)