CB534C Roller does not have valve or adapters.
Remove two adapters (Figure 3, Item 1), valve (Figure 3, Item 4), and two bushings (Figure 3, Item 3) from
strainer assembly (Figure 3, Item 2).
Figure 3. Water Spray Strainer Disassembly.
END OF TASK
Clean fittings, bushings, valve, and strainer assembly with detergent and water. Remove difficult deposits with
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle
pressure when drying parts with compressed air. Use a maximum of 30 psi (207 kPa) when
cleaning components. DO NOT direct compressed air against human skin. Failure to follow
this warning may cause injury or death. Make sure air stream is directed away from user and
other personnel in the area. To prevent injury, user must wear protective goggles or face
Use a cleaning cloth or compressed air to dry metal parts.
Check fittings, bushings, and valve for clogging, corrosion, or excessive wear.
Check strainer assembly for clogging, corrosion, excessive wear, and obvious signs of damage.
Check all parts for stripped or damaged threads.