TM 5-3895-379-23-2
0262
FILL
1.
Install plug (Figure 3, Item 2) in vibratory reservoir (Figure 3, Item 3).
2.
Remove chocks from drums (TM 5-3895-379-10).
3.
Start engine (TM 5-3895-379-10).
4.
Move roller (Figure 3, Item 1) until bar (Figure 3, Item 5) is at bottom of drum (Figure 3, Item 4).
5.
Turn off engine (TM 5-3895-379-10).
6.
Chock drums (TM 5-3895-379-10).
7.
Place drain pan with of 3.1 gal (12 Liters) minimum capacity under fill hole.
8.
Remove plug (Figure 3, Item 2) from vibratory reservoir (Figure 3, Item 3).
9.
Add oil (Volume 1, WP 0071) and (Volume 1, WP 0073).
10.
Install plug (Figure 3, Item 2) in vibratory reservoir (Figure 3, Item 3).
11.
Check oil level gage (Figure 3, Item 6) on roller drum (Figure 3, Item 5). Oil level is correct when oil fills half of
oil level gage viewing window.
1
2
3
6
M0192SWR
5
4
Figure 3.
Vibratory Bearing Reservoir Fill.
END OF TASK
FOLLOW-ON MAINTENANCE
Remove chocks. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00200)