TM 5-3895-379-23-2
0261
DISASSEMBLY
1.
Remove gasket (Figure 2, Item 5) and pressure plate (Figure 2, Item 6) from cover (Figure 2, Item 8). Discard
gasket.
WARNING
Retaining ring is under spring tension to avoid injury, wear eye protection and use caution
when installing.
2.
Remove retaining ring (Figure 2, Item 4), cap (Figure 2, Item 7), and ball (Figure 2, Item 3) from cover
(Figure 2, Item 8).
3.
If damaged, drill pin (Figure 2, Item 1) out and remove lever (Figure 2, Item 2) from cover (Figure 2, Item 8).
1
2
8
7
3
6
5
4
M0187SWR
Figure 2. Hydraulic Oil Cap Disassembly.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00199)