TM 5-3895-379-23-2
0257
CLEANING AND INSPECTION - Continued
NOTE
Excessive amounts of debris in filter can be an indication of internal wear and possible
hydraulic system component failure. If large amounts of debris are found, notify Direct
Support Maintenance.
2.
Inspect element (Figure 2, Item 4) for metal or other debris. Report any excessive debris found in element to
supervisor.
END OF TASK
INSTALLATION
CAUTION
Do not overtighten filter on filter base. Failure to follow this caution may cause damage to
filter.
1.
Apply a light coat of lubricating oil on filter gasket (Figure 2, Item 2).
2.
Install filter (Figure 2, Item 3) on filter base (Figure 2, Item 1). Tighten filter 3/4 of a turn after filter makes contact
with filter base.
1
INSTALL
4
REMOVE
2
3
M0827SWR
Figure 2. Hydraulic Oil Filter Installation.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00195)