TM 5-3895-379-23-2
0252
REMOVAL
1.
Remove electrical tiedown strap (Figure 1, Item 5) and disconnect electrical connector (Figure 1, Item 4).
CAUTION
Cap and plug all hoses, fittings, and openings immediately after removal. Contaminants
entering the system may cause premature failure.
NOTE
Use drain pan to catch any hydraulic oil that may drain from system. Dispose of oil IAW
local policy and ordinances. Ensure all spills are cleaned up.
Tag and mark all hydraulic lines and hoses to ensure correct installation.
2.
Disconnect two hose assemblies (Figure 1, Item 3) and two hose assemblies (Figure 1, Item 2) from vibratory
motor (Figure 1, Item 8).
3.
Remove four nuts (Figure 1, Item 6) and washers (Figure 1, Item 7) from plate (Figure 1, Item 9).
4.
Pull vibratory motor (Figure 1, Item 8) from drum (Figure 1, Item 1).
5
4
1
3
2
4
3
6, 7
9
2
8
M0818SWR
Figure 1.
Vibratory Motor Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00190)