TM 5-3895-379-23-2
0244
ASSEMBLY - Continued
32.
Install cap (Figure 24, Item 5) on height adjustment lever (Figure 24, Item 6).
33.
Install spring (Figure 24, Item 2), latch assembly (Figure 24, Item 3), and height adjustment lever
(Figure 24, Item 6) in upper housing assembly (Figure 24, Item 4).
34.
Install spring pin (Figure 24, Item 1) in latch assembly (Figure 24, Item 3) and height adjustment lever
(Figure 24, Item 6).
3
4
1
2
CROSS-SECTION VIEW
5
6
M0802SWR
Figure 24.
Seat Suspension Assembly.
35.
Position link (Figure 25, Item 1) on link (Figure 25, Item 3) on right-side of seat suspension assembly
(Figure 25, Item 8) ensuring that hole is fully seated on shoulder of stud.
36.
Apply sealing compound to threads of locknut (Figure 25, Item 7).
37.
Install link (Figure 25, Item 1) on link (Figure 25, Item 3) with washer (Figure 25, Item 6) and new locknut
(Figure 25, Item 7).
38.
Position link (Figure 25, Item 1) on fingers of latch assembly (Figure 25, Item 2).
39.
Position torsion spring (Figure 25, Item 4) and link (Figure 25, Item 3) on upper housing assembly
(Figure 25, Item 9).
40.
Install ends of torsion spring (Figure 25, Item 4) in left-side of upper housing assembly (Figure 25, Item 9) and
link (Figure 25, Item 3).
WARNING
Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent or retaining compound gets on skin or clothing,
wash immediately with soap and water.
41.
Apply sealing compound to threads of bolts (Figure 25, Item 5).
42.
Install torsion spring (Figure 25, Item 4) and link (Figure 25, Item 3) on upper housing assembly
(Figure 25, Item 9) with two bolts (Figure 25, Item 5), using socket wrench screwdriver attachment.
03/15/2011Rel(1.8)root(maintwp)wpno(M00182)