TM 5-3895-379-23-2
0242
DISASSEMBLY - Continued
3.
Remove three screws (Figure 2, Item 2) and left arm assembly (Figure 2, Item 4) from seat shell
(Figure 2, Item 3).
4.
Remove three screws (Figure 2, Item 2) and right arm assembly (Figure 2, Item 1) from seat shell
(Figure 2, Item 3).
5.
Remove clip (Figure 2, Item 6) and trim (Figure 2, Item 5) from seat shell (Figure 2, Item 3).
6.
Remove backrest cushion (Figure 2, Item 11) and seat cushion (Figure 2, Item 10) from seat shell
(Figure 2, Item 3).
NOTE
Seat assembly must be moved to full forward or full rear position to remove screws and nuts
holding seat supports to the adjuster assembly.
7.
Remove four nuts (Figure 2, Item 7), screws (Figure 2, Item 8), and seat shell (Figure 2, Item 3) from seat
adjuster (Figure 2, Item 9).
1
2
3
2
4
11
10
5
6
7
8
9
M0776SWR
Figure 2. Seat Assembly Disassembly.
8.
Remove four capscrews (Figure 3, Item 2), washers (Figure 3, Item 3), and two seat assembly bars
(Figure 3, Item 4) from bottom of seat shell (Figure 3, Item 6).
9.
Remove four locknuts (Figure 3, Item 1) and seat adjuster (Figure 3, Item 5) from seat suspension
(Figure 3, Item 7). Discard locknuts.
03/15/2011Rel(1.8)root(maintwp)wpno(M00180)