TM 5-3895-379-23-2
0234
REMOVAL - Continued
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this
warning may cause injury or death.
NOTE
ROPS assembly weighs 880 lb (399 kg).
4.
Attach lifting device to ROPS assembly (Figure 2, Item 2).
NOTE
There are 11 remaining bolts attaching ROPS assembly to frame assembly. Leave one bolt
in each side for stability.
5.
Remove nine bolts (Figure 2, Item 3) and washers (Figure 2, Item 4) from ROPS assembly (Figure 2, Item 2)
and frame assembly (Figure 2, Item 1).
6.
Raise lifting device until tight.
7.
Remove remaining two bolts (Figure 2, Item 3) and washers (Figure 2, Item 4) from ROPS assembly
(Figure 2, Item 2) and frame assembly (Figure 2, Item 1).
8.
While assistant operates lifting device, guide ROPS assembly (Figure 2, Item 2) from frame assembly
(Figure 2, Item 1).
1
2
4
3
1
M0740SWR
Figure 2.
Rollover Protection Structure (ROPS) Assembly Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00172)