SEPARATE - Continued
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this
warning may cause injury or death.
Weight of propel motor and torque hub is 270 lb (122 kg).
Using a lifting strap and hoist, raise and support propel motor (Figure 2, Item 2) and torque hub
(Figure 2, Item 3).
· Use drain pan to catch any oil that may drain from torque hub. Dispose of oil IAW local
policy and ordinances. Ensure all spills are cleaned up.
· Weight of propel motor is 55 lb (25 kg).
Remove two bolts (Figure 2, Item 1) and, with assistance, remove propel motor (Figure 2, Item 2) and O-ring
(Figure 2, Item 4) from torque hub (Figure 2, Item 3). Discard O-ring.
Figure 2. Propel Motor and Torque Hub Separate.
END OF TASK
Position new O-ring (Figure 3, Item 4) on torque hub (Figure 3, Item 3).