Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this
warning may cause injury or death.
Weight of drive plate is 230 lb (104 kg).
Attach lifting straps and lifting device to drive plate (Figure 4, Item 1).
Position drive plate (Figure 4, Item 1) on propel motor and torque hub (Figure 4, Item 2) and install 10 nuts
(Figure 4, Item 3).
Figure 4. Propel Motor and Torque Hub Installation.