REMOVAL - Continued
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this
warning may cause injury or death.
Weight of drive plate is 230 lb (104 kg).
Remove 10 nuts (Figure 3, Item 3) and drive plate (Figure 3, Item 1) from propel motor and torque hub
(Figure 3, Item 2).
Figure 3. Propel Motor and Torque Hub Removal.
END OF TASK