Fuel Lines and Fittings Leaking, Kinked, or Damaged.
· DO NOT perform fuel system checks, inspections or maintenance while
smoking or near fire, flames or sparks. Fuel may ignite, causing injury or death,
or damage to machine.
· Operating personnel must wear fuel-resistant gloves when handling fuels. If
exposed to fuel, properly wash exposed skin and change fuel-soaked clothing.
· Fuel and oil are very slippery. Immediately wipe up any spills. Failure to follow
this warning may cause injury.
Open left-side door assembly (TM 5-3895-379-10).
Check fuel lines and fitting for looseness or damage such as kinks, tears, or restrictions.
If fuel lines or fittings are loose, tighten.
If fuel lines or fittings are damaged, perform the following as needed:
Replace fuel injector and nozzle (CB534B) (WP 0109).
Replace fuel injector and nozzle (CB534C) (WP 0110).
Replace fuel lines and fittings (CB534B) (WP 0114).
Replace fuel lines and fittings (CB534C) (WP 0115).
Figure 1. Fuel Lines.