TM 5-3895-379-10
DRUM SCRAPER SERVICE - CONTINUED
0023 00
ADJUSTMENT
NOTE
A small amount of pressure on the scraper
is required.
TOOLBOX
1.
Remove 3/4 in. socket and 1/2 in. drive ratchet from
toolbox.
2.
Install 3/4 in. socket on ratchet.
NOTE
There are four locknuts on the CB534C
Roller.
3.
Loosen eight bolts (1) two full turns.
4.
Loosen eight bolts (2).
5.
Position scraper (3) so that scraper (3) contacts drum
(4) surface firmly and evenly from end to end without
bending.
6.
Tighten eight bolts (1) and bolts (2) from center of
scraper outward while applying downward pressure on
spring (5) to ensure a small amount of pressure on the
scraper.
7.
Remove 3/4 in. socket from ratchet and stow both
tools in toolbox.
8.
4
5
2
1
3
401-111
END OF WORK PACKAGE
0023 00-2