DRAINING AND FILLING FUEL AND HYDRAULIC OIL TANKS - CONTINUED
FILL FUEL TANK
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Fuel may ignite, causing injury, death or damage to roller.
Wear fuel-resistant gloves when handling fuels and promptly wash exposed skin and change fuel-
Place portable fire extinguisher within reach prior to refueling.
DO NOT overfill tank. If fuel starts foaming from fuel tank, stop immediately to avoid fuel spillage.
Fuel is very slippery. If fuel is spilled, clean fuel up immediately to avoid injury. Before starting roller,
check that no fuel is spilled on or around machine.
Fuel tank capacity is 55 gal. (208 l).
Using 24 mm wrench, install new preformed packing
(2) and cap (1) on elbow (3).
Remove cap (9) from fuel tank (10).
Fill fuel tank (10) with 55 gal. (208 l) of fuel.
Install cap (9) on fuel tank (10).
Stow 24 mm wrench in toolbox.
END OF WORK PACKAGE
0019 00-5/(0019 00-6 Blank)