DRAINING AND FILLING FUEL AND HYDRAULIC OIL TANKS - CONTINUED
CLEANING AND INSPECTION
Dirt, grit, and metallic particles can cause damage to hydraulic and engine components. Cap and hose
assembly should be clean before cap is installed.
Inspect for metallic particles in cap.
Inspect union and elbow threads and cap threads for damage.
Clean caps, union, elbow, and around union and elbow.
Clean cap threads and hydraulic tank hose assembly threads with clean hydraulic oil and rags.
Notify supervisor for replacement of lost or damaged parts.
FILL HYDRAULIC OIL TANK
Oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause injury.
Hydraulic oil tank capacity of the CB534B
Roller is 15.5 gal. (59 l). Hydraulic oil
tank capacity of the CB534C Roller is 24
gal (91 l).
Using 24 mm wrench, install new preformed packing
(5) and cap (4) on union (6).
Remove cap (7) from hydraulic tank (8).
Fill hydraulic tank (8) with hydraulic oil.
Install cap (7) on hydraulic tank (8).
Stow 24 mm wrench in toolbox.