TM 5-3895-379-10
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0012 00
Table 1. Operator Preventive Maintenance Checks and Services (PMCS) for DSWR - Continued.
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
Operator Sta- a. Check that rotation lock operates Rotation lock is missing or
23
Before
freely and locks operator station in will not lock in holes in oper-
tion
ator platform.
NOTE
Operator station will not pivot full 180 degrees unless handrails
are adjusted for operation.
b. Check that operator station freely
WARNING
Your hearing can be PERMANENTLY DAMAGED if you are
exposed to constant high noise levels of 85 DB or greater. Hear-
ing protection is required when operating roller or when work-
ing on roller while it is operating. Failure to wear hearing
protection may result in hearing loss.
Ensure area around the roller is clear of personnel before starting
engine. Failure to follow this warning may cause injury or death.
24
Before
Neutral Start a. Push propel control lever forward.
Switch
b. Pull up on parking brake switch to
release parking brake.
c. Ensure that area is free of personnel
and path of travel is clear.
d. Position propel control lever in full
forward position.
e. Insert key in engine start switch.
NOTE
Do NOT allow engine to start during this check.
f. Hold engine start switch key in Engine attempts to start
START position while slowly mov- before control lever is in
ing propel control lever to full back NEUTRAL position.
(REVERSE) and then to center
(NEUTRAL/STOP) position. Turn
engine start switch to OFF position.
0012 00-11