OPERATION UNDER UNUSUAL CONDITIONS - CONTINUED
SLAVE START ROLLER - CONTINUED
Remove caps (1) from NATO connectors (2) on "live" machine and roller.
To avoid injury, eye protection and acid-resistant gloves must be worn when working around batteries.
Do not smoke, use open flame, make sparks or create other ignition sources around batteries. If a battery
is giving off gases, it may explode and cause injury. Remove all jewelry such as rings, ID tags, watches,
and bracelets. If jewelry or a tool contacts a battery terminal, a direct short will result in instant heating,
damage to equipment, and injury.
Sulfuric acid contained in batteries can cause serious burns. If battery corrosion or electrolyte makes
contact with skin, eyes or clothing, take immediate action to stop the corrosive burning effects. Failure
to follow these procedures may result in injury or death.
Remove caps (3) from NATO slave cable connector
Plug NATO slave cable connector (4) into NATO con-
nectors (2) on "live" machine and roller.
Start "live" machine (refer to "live" machine's Opera-
Operate "live" machine at high idle (refer to "live"
machine's Operator's Manual) while attempting to
When roller engine is running smoothly, remove
NATO slave cable connectors (4) from NATO connec-
tors (2) of "live" machine and roller.
Install caps (3) on NATO slave cable connectors (4).
Install caps (1) on NATO connectors (2) on "live"
machine and roller.
Move and park "live" machine (refer to "live"
machine's Operator's Manual).
Shut off "live" machine (refer to "live" machine's