CHAPTER 5
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS AND EQUIPMENT
5-1. Special Tools and Equipment
5-2. Maintenance Repair Parts
No special tools or equipment required.
Repair parts for direct and general support are listed in
appendix D of
this manual. Reference TM
5-2805-258-
24P for engine repair parts listing.
Section II. TROUBLESHOOTING
5-3. General
causes. The corrective action recommended is described
Malfunctions which may occur are listed in Table 5-1.
opposite the probable cause.
Each malfunction stated is followed by a list of probable
Table 5-1. Troubleshooting
Malfunction
Probable Cause
Corrective Action
1. Vibrator shaft does not turn.
a. Replace shaft hearings.
b. Clutch slipping.
b. Adjust or replace clutch disc.
2. Engine
TM 5-2805-258-14
TM 5-2805-258-14
Section III. REMOVAL AND INSTALLATION
OF MAJOR COMPONENTS
(3) Remove bolts (7), washers (8), and remove
5-4. Power Takeoff
power takeoff (9) from engine (10).
b. Installation. Installation is in the reverse of removal.
(1) Remove belt guard and belt (para 4-12).
(2) Remove nuts (1), bolts (2), shim (3), bolts (4),
washers (5) and (6) remove support (7).
5-1